manualshive.com logo in svg

Honeywell Thor VM2, User Manual

The Honeywell Thor VM2 is a powerful vehicle-mounted computer designed for robust warehouse operations. This rugged device ensures seamless productivity with its advanced features. To make the most of this device, you can easily download its comprehensive user manual for free from our website, manualshive.com. Enjoy hassle-free operations with this cutting-edge industrial solution.

Share
Download
background image

ii

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this 
document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been 
made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages 
resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of soft-
ware and/or hardware to achieve intended results.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document 
may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Copyright 

 2017 Honeywell International Inc. All rights reserved.

Web Address: 

www.honeywellaidc.com

Trademarks

RFTerm is a trademark or registered trademark of EMS Technologies, Inc. in the United States and/or other countries.

Microsoft® Windows, ActiveSync®, MSN, Outlook®, Windows Mobile®, the Windows logo, and Windows Media are registered trade-
marks or trademarks of Microsoft Corporation in the United States and/or other countries.

Intel® and Atom™ are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other 
countries.

Laird Technologies, the Laird logo, Summit Data Communications, the Summit logo, and “Connected. No Matter What” are trade-
marks of Laird Technologies, Inc.

Wi-Fi®, WMM®, Wi-Fi Mutlimedia™, Wi-Fi Protected Access®, WPA™, WPA2™ and the Wi-Fi CERTIFIED™ logo are trademarks or regis-
tered trademarks of Wi-Fi Alliance.

The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.

Symbol® is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M Logo 
are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.

Wavelink®, the Wavelink logo and tagline, Wavelink Studio™, Avalanche Management Console™, Mobile Manager™, and Mobile 
Manager Enterprise™ are trademarks of Wavelink Corporation, Kirkland, WA.

RAM® and RAM Mount™ are both trademarks of National Products Inc., 1205 S. Orr Street, Seattle, WA 98108.

Qualcomm® is a registered trademark of Qualcomm Incorporated. Gobi is a trademark of Qualcomm Incorporated.

Verizon® is a registered trademark of Verizon Trademark Services LLC.

T-MOBILE®is a registered trademark of Deutsche Telekom AG.

AT&T® is a registered trademark of AT&T Intellectual Property.

SD and SDHC are trademarks or registered trademarks of SD-3C, LLC in the United States and/or other countries.

SanDisk® and CompactFlash® are trademarks of SanDisk Corporation, registered in the United States and other countries.

ATP is a trademark of ATP Electronics, Inc.

FreeDos is a trademark of Jim Hall. FreeDOS is distributed under the 

GNU General Public License Version 2

 (GPLv2) and 

GNU 

General Public License Version 3

 (GLPv3). Source code is available by contacting 

Technical Assistance

 or by writing Honeywell 

Scanning and Mobility, 9680 Old Bailes Road, Fort Mill, SC 29707 USA and requesting software package 

VM2PFDOS11SRC1AB

.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and 
are the property of their respective owners.

Patents

For patent information, refer to 

www.hsmpats.com.

Summary of Contents for Thor VM2















































































































































































































































































































































































































Reviews:

No comments

Related manuals for Thor VM2

ABB CS500 Mounting Instructions preview
CS500
Brand: ABB Pages: 27
Ranger design 5044 Installation Manual preview
5044
Brand: Ranger design Pages: 6
Baicells Nova-233 G2 Installation Installation preview
Nova-233 G2
Brand: Baicells Pages: 32
BAFANG C965 Manual preview
C965
Brand: BAFANG Pages: 18
VANPOWERS DP C240.CAN User Manual preview
DP C240.CAN
Brand: VANPOWERS Pages: 23
Banner DF-G1 Expert Install Sheet preview
DF-G1 Expert
Brand: Banner Pages: 10
Jeep Compass Owner'S Handbook Manual preview
Compass
Brand: Jeep Pages: 322
Jeep Compass Repair Manual preview
Compass
Brand: Jeep Pages: 341
Jeep Compass Operating Information Manual preview
Compass
Brand: Jeep Pages: 310
Jeep Compass Information Manual preview
Compass
Brand: Jeep Pages: 189
Jeep Compass Review preview
Compass
Brand: Jeep Pages: 26
Jeep Compass Overview preview
Compass
Brand: Jeep Pages: 21
Vello CB-300 Manual preview
CB-300
Brand: Vello Pages: 8
Wavetronix SmartSensor Matrix Quick Start Manual preview
SmartSensor Matrix
Brand: Wavetronix Pages: 2
Watt Stopper CI-200 Installation Instructions Manual preview
CI-200
Brand: Watt Stopper Pages: 8
Porsche Carrera GT Manual preview
Carrera GT
Brand: Porsche Pages: 192
Lincoln 2015 MKS Owner'S Manual preview
2015 MKS
Brand: Lincoln Pages: 424
Volkswagen 1983 Camper Onwers Manual preview
1983 Camper
Brand: Volkswagen Pages: 26

Brands by name

Popular brands

Load more brands