Honeywell Thor VM2, User Manual, Page: 298 / 398

286 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Data
The Data tab controls when data is transferred between the Thor VM2 and the Mobile
Device Server.
Contact On Startup – Connect to the Mobile Device Server when the Enabler is
accessed.
On Resume – Connect to the Mobile Device Server when resuming from
Suspend mode.
On IP Change – Connect to the Mobile Device Server when the IP address of
the Thor VM2 changes.
On Ext. Power – Initiate connection to the Mobile Device Server when the
device is connected to an external power source, such as based on a docking
event.
Contact Periodically /
Periodic Update Allows the administrator to configure the Enabler to contact the Mobile
Device Server and query for updates at a regular interval beginning at a
specific time.
Wakeup device if
suspended If the time interval for periodic contact with the Mobile Device Server occurs,
a mobile device that is in Suspend Mode can wakeup and process updates.
Reboot before attempt Reboot mobile device before attempting to contact Mobile Device Server.
Require external power Only connect when the mobile device has external power.
Use relative offset Dimmed.
Network When checked, the LAN/Wi-Fi network is enabled to transfer statistics.
Report Specifies the Report Interval, how frequently the Enabler reports statistics to the
Mobile Device Server.
Retransmit After
Server Contact Specifies if the device sends statistics to the Mobile Device Server immediately
following a connection to the server.
Restrict
Bandwidth to
User Idle Time When enabled, periodic updates from the Mobile Device Server are postponed until the
Thor VM2 has been idle for the specified period of time. The default is disabled.
Idle timeout Specify the length of time the device must be idle before a periodic update can run,
used when the parameter above is enabled.