Honeywell Thor VM2, User Manual

Page: 174 / 398

162 Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
If no application is specified when the Administrator Control Panel is closed, the mobile
device reboots into Administrator mode. If a password has been set, but an application
has not been specified, the user will be prompted for the password before entering
administration mode. The password prompt remains on the display until a valid pass-
word is entered.
Application Launch Options
Tap the Launch... button to access the application launch options. This panel displays
the Launch options panel for the Filename selected on the Administration panel.
Option Explanation
Filename Default is blank. Move the cursor to the Filename text box and either type the application
path or tap the Browse button (the … button). The standard Windows CE Browse dialog is
displayed. After selecting the application from the Browse dialog, tap OK.
Title Default is blank. Enter the Title to be associated with the application. The assumption is
that multiple copies of the same application may need unique titles in order to differentiate
them in the
Switchpad .
Arguments Default is blank. Enter the command line parameters for the application in the Arguments
text box.
Order Default is 1. Enter the Order in which the application is to be loaded or presented to the
end-user. Applications are launched in lowest to highest number order and do not need to
be sequential.
Internet Default is Disabled. Enable the Internet checkbox to use the End-user Internet Explorer
(EUIE.EXE). When the checkbox is enabled, the Internet Menu and Internet Status are
available. See the section titled End-user Internet Explorer (EUIE) for more details.
Launch... See following section titled Application Launch Options .
Note: AppLock Administrator Control panel file Launch option does not inter-relate with
similarly-named options contained in other Control Panels.
Global Key Default is Ctrl+Spc. Select the Global Key key sequence the end-user is to press when
switching between applications. The Global Key default key sequence must be defined by
the AppLock Administrator. The Global key is presented to the end-user as the Activation
key.
Global
Delay Default is 10 seconds. Enter the number of seconds that Applications must wait before
starting to run after reboot.
Note: Delay (Global) may not be available in all versions of AppLock. You can simulate a
Global Delay function by setting a delay for the first application (lowest Order)
launched and setting the delay to 0 for all other applications. See Boot Options.
Input Panel Default is Disabled. Enable (check) to show the Keyboard option on the Switchpad menu.
When enabled the input panel cannot be enabled or disabled for each individual
application, and is available to the user for all configured applications.
ton Tap the ton to clear all currently displayed Filename or Application information. The Global
settings are not cleared.
Scroll
Buttons Use the left and right scroll buttons to move from application setup screen to application
setup screen. The left and right buttons update the information on the screen with the
previous or next configured application respectively.