Honeywell Thor VM2 User Manual Download

Page: 316 / 398

304

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

Enter the Admin password (the default password is SUMMIT and is case sensitive) and
tap

. If the password is incorrect, an error message is displayed.

The Administrator default password can be changed on the Global tab.

The end-user can:

•

Turn the radio on or off on the Main tab.

•

Select an active Profile on the Main tab.

•

View the current parameter settings for the profiles on the Profile tab.

•

View the global parameter settings on the Global tab.

•

View the current connection details on the Status tab.

•

View radio status, software versions and regulatory domain on the Main tab.

•

Access additional troubleshooting features on the Diags tab.

After Admin Login, the end-user can also:

•

Create, edit, rename and delete profiles on the Profile tab.

•

Edit global parameters on the Global tab.

•

Enable/disable the Summit tray icon in the taskbar.

Profile

Start > Programs > Summit > Profile tab

Note:

Tap the

Commit

button to save changes before leaving this panel or the SCU. If the panel

is exited before tapping the

Commit

button, changes are not saved!

Factory Default Settings

Profile

Default

SSID

Blank

Client Name

Blank

Power Save

CAM

Tx Power

Maximum

Bit Rate

Auto

Radio Mode

BGA rates full

Auth Type

Open

EAP Type

None

Summary of Contents for Thor VM2















































































































































































































































































































































































































Search results

Summary of Contents for Thor VM2

Reviews:

Related manuals for Thor VM2

Brands by name

Popular brands

Honeywell Thor VM2, User Manual

Search results

Summary of Contents for Thor VM2

Reviews:

Related manuals for Thor VM2

Brands by name

Popular brands