Honeywell Thor VM2, User Manual, Page: 169 / 398

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 157
Setup a New Device
Devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the Thor VM2 is first booted, the user has full access to the
device and no password prompt is displayed. After the administrator specifies the appli-
cations to lock, a password is assigned and the device is rebooted or the hotkey is
pressed, the device switches to end-user mode.
Briefly, the process to configure a new device is as follows:
1. Connect an external power source to the device and press the Power button.
2. Adjust screen display, audio volume and other parameters if desired. Install
accessories.
3. Tap Start > Settings > Control Panel > Administration icon.
4. Assign applications on the Control (single application) or Application (dual
application) tab screen.
5. Assign a password on the Security tab screen.
6. Select a view level on the Status tab screen, if desired.
7. Tap OK
8. Press the hotkey sequence to launch AppLock and lock the configured
application(s)
9. The device is now in end-user mode.
Administration Mode
Administration mode gives full access to the mobile device, hardware and software con-
figuration options.
Auto Re-launch Retries 0
Auto Re-launch Delay 0 sec
Manual Launch Disabled
Allow Close Disabled
Security
Hotkey (Activation key) Shift+Ctl+A
Password Blank
Options
Launch timeout 60000
Replace timeout 20000
Restart timeout 20000
Status
Filename \System\apploc
k.txt
View Level None
Log Level None