Chapter 6 — Maintain the Printer
64
PM42 Industrial Label Printer User Manual
How to Clean the Printer
To properly maintain the printer, regularly clean these printer parts:
•
Printhead
•
Media guides
•
Exterior of the printer
Follow these guidelines:
•
Always remove the power cord before cleaning.
•
Never spray the printer with water. Protect it from water when
cleaning the premises.
•
Never use sharp tools for removing stuck labels. The printhead and
rollers are delicate.
Clean the Printhead
Clean the printhead on a regular basis to extend the life of the printhead
and maintain print quality. You should clean the printhead each time you
replace the media. The printer ships with a cleaning card, but you can
contact your local Honeywell representative to order additional cleaning
cards.
1
Turn off the printer and disconnect the printer from power.
2
Open the media cover.
3
Remove the media and ribbon (if installed).
Caution: To avoid possible personal injury or damage to the printer,
never insert any pointed or sharp objects into the printer.
Caution: Use only the cleaning agents specified in this section.
Honeywell is not responsible for damage caused by any other
cleaning materials used on this printer.
Caution: Isopropyl alcohol is a highly flammable, moderately toxic,
and mildly irritating substance.
Caution: Never use hard or sharp tools to peel away stuck labels or
other material. The printhead is delicate and can easily be
damaged.
V10 CONSUMIBLES S.L.
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309