Honeywell MPA1 User Manual Download Page 88

Page: 88 / 120

www.honeywell.com/security

92 |

MPA1 User Guide

Taking System-wide Backup for panel(s) is only allowed from Primary (gateway) panel's file

management page.

•

Upon selecting system wide backup, UI will show a field to enter password

•

Password Must follow rules for valid password checks - need not be same as

current user/admin password:

•

Click save button the spinner will show while Primary panel is getting configuration
data from the Secondary panels.

Note

The Backup file saves as a .bkp file.

Download (To Panel)

Following types of downloads are allowed from File Management sections

•

Firmware (.bin file)

•

Card Report (.CSV file)

•

Backup file (.bkp file)

Firmware Download (Also see:

Firmware Upgrades

)

To restore (or download) firmware to a panel:
1. Select a Panel first, on which you want to download firmware from Panel

Configuration menu.

2. Click Browse to locate the firmware file.
3. Click Download.

When the download is completed, the panel is immediately rebooted. A status bar indicates

the progress of the reboot.

Summary of Contents for MPA1

























































































































Search results

Summary of Contents for MPA1

Reviews:

Related manuals for MPA1

Brands by name

Popular brands

Honeywell MPA1, User Manual

Search results

Summary of Contents for MPA1

Reviews:

Related manuals for MPA1

Brands by name

Popular brands