| 73
Document 800-26311_ A - April 2020
Configuring Access Groups
Every card is assigned an access group, which specifies the schedule, or time schedule,
during which the card holder can be granted access at a specific door. For example, an
access group embedded in an employee’s card might allow the employee to enter the
facility only through door 2 from 6:00 AM to 6:00 PM, Monday through Friday.
On the Access Groups panel, you can:
• Select Reader A and/or Reader B for each door. Note that if a reader is disabled,
then the schedule drop down list for that reader will not be accessible.
• Create an access group.
• Modify an access group.
• Delete an access group.
• Set a Schedule for each door.
• View other panels with readers in this access group.
Note
Since an access group is defined by door and schedule configurations, you
), people (see
), and the schedule (see
) before configuring an access group.
To navigate to the Access Configuration page, click:
•
Menu
>
Configuration
>
People & Access
>
Access
>
Create an Access Group
, or
•
Access
Groups
in the
Dashboard
, then
Create an Access Group.
Figure 2-44 Access Group Configuration Page
Summary of Contents for MPA1
Page 1: ...Document 800 26311_Rev B July 2020 Access Control Unit MPA1 User Guide ...
Page 14: ... 13 Document 800 26311_ A April 2020 This page is intentionally left blank ...
Page 72: ... 75 Document 800 26311_ A April 2020 This page is intentionally left blank ...
Page 100: ...www honeywell com security 104 MPA1 User Guide This page is intentionally left blank ...
