Honeywell MPA1, User Manual

Page: 53 / 120

www.honeywell.com/security
56 |
MPA1 User Guide
4. Click Save .
Configuring Output Groups
Note You must select at least one output before you can create a group.
The Output Groups tab allows you to configure the following:
• A group of horns to sound for a set time during a set period
• Energize or de-energize a group of doors during a set period
In the Output Groups tab, you can configure the following for one or more groups:
• Pulse time
• Disable/Enable Latch
• Energized (schedule selection)
• Disable Interlock (schedule selection)
1. Navigate to the Output Groups tab: Click Panel Configuration > Outputs > Groups .
Energized Specifies the period during which the output relay is
automatically energized. Select a schedule (that you created in
Entering a Panel Name on page 28 ) from the drop-down list.
Disable Interlocks Specifies the period during which the interlocks that control
the output will be disabled. Select a schedule (that you created
in Entering a Panel Name on page 28 ) from the drop-down list.
Setting Description