40X ZOOM IR PTZ DOME CAMERA USER GUIDE
56
Configuring Video Tamper
You can configure camera tampering event settings on the
Setting
Event
Video
Detection
Video Tamper
page.
To enable camera tampering detection:
1.
Select the
Enable
Tamper Detect and/or the Enable Defocus Detect check box(es).
2.
Next to
Period
, click
Setting
. The
Period
window opens.
3.
Set the days and times when you want the alarm function to be active, and then click
Save
.
4.
To start recording video when a camera tampering event is detected, ensure
that the Record check box is selected.
5.
In the
Record Delay
field, enter the number of seconds that the system will
continue to record video after a camera tampering event has ended. Enter a
value between
10
and
300
.
6.
To generate an alarm output when a camera tampering event is detected, select the
Alarm Output
check box and select the alarm output(s) to be activated.
7.
In the Alarm Delay field, enter the number of seconds that the system will
continue to generate an alarm output after a camera tampering event has
ended. Enter a value between
10
and
300
.
8.
To send an email notification when a camera tampering event is detected, select
the S
end Email
check box. Email settings must be configured in
Setting
Network
SMTP (Email)
.
9.
To initiate a predefined preset, tour, or pattern when a camera tampering event
is detected, select the
PTZ
check box and select the desired action from the
Activation
list.
10.
To take a snapshot when a camera tampering event is detected, select the
Snapshot
check box.