40X ZOOM IR PTZ DOME CAMERA USER GUIDE
43
By default, the maximum number of simultaneous connections the camera will
support is set to 10. To change this setting, in the Max Connections field, enter a
value between 1 and 20.
If you want, you can change the TCP, UDP, HTTP, RTSP, and HTTPS port numbers
from their defaults.
Click
Save
to apply the settings.
Configuring RTSP
RTSP Over TLS
is used to encrypt video stream transmit between browser and device
or device and headend.
You can enable or disable RTSP Over TLS on the
Setting
Network
Access
Platform
RTSP
page.
RTSP Over TLS
is disabled by default. To enable it, click
ON
, and then click
Save
. Note:
RTSP Over TLS
is effective only for
TCP
protocol at present.
Configuring PPPoE
You can configure Point-to-Point Protocol over Ethernet (PPPoE) settings on the
Setting
Network
PPPoE
page.
To enable PPPoE:
1.
Select the
Enable
check box.
2.
In the
User Name
and
Password
fields, enter the user name and password
that you received from your Internet service provider (ISP).
3.
Click
Save
to apply the settings. The camera will connect to the Internet via PPPoE
after rebooting.