40X ZOOM IR PTZ DOME CAMERA USER GUIDE
51
Filtering IP/MAC Address
You can configure IP filter settings on the
Setting
System
Safety
page.
When the IP filter is enabled, remote access to the camera is restricted to specific IP or
MAC addresses. You can add or remove addresses from the list at any time. If a user is
accessing the camera over a WAN, enter the MAC address of the user's router instead
of an IP address.
Adding IP/Mac Addresses to the List of Approved Users
To add an IP/MAC address:
1.
Click
Add IP/MAC
.
2.
In the
Add IP/MAC
window, select
IP Address
,
IP Segment,
or
MAC
from the drop-down list, enter the relevant address, and then click
Save
.
The address is added to the list of approved users.