Rev. 1.02
31
900.0679
22-June-2006
5.3
CONTROL OPTIONS, CONTINUED
c. Enter a number in the NUM field using the numeric keypad to enter the function #
(P=0-98, V= 0-9, and T=1-3).
d. Press
Enter (F5)
when finished programming alarms.
See table below for field entry.
Field
Usage
FUN (function)
Enter function to perform. (P=PreShot, V=VectorScan, T=PTZ Tour.)
NUM (number) Enter the number of the PreShot, VectorScan, or PTZ Tour.
ENA (enable)
Enter Y to enable or N to disable the alarm.
If:
Then:
Alarm is disabled
The scan ignores a change of state in the alarm input.
Alarm is enabled and not
programmed
The scan ignores a change of state in the alarm input.
Alarm is enabled and
programmed
The scan performs the action programmed for the alarm input
when a change of state occurs.
Scan adds AL and the alarm number to the video signal.
AL flashes until all alarms are acknowledged.
Alarm status is displayed on-screen on the same line as the
Camera ID display.
Alarm number flashes until the contact returns to its normal
state.
Summary of Contents for HD6 Series
