10.7 VECTORSCAN (VIDEO TOUR)
CAUTION:
Continuous VectorScan operation for extended
periods of time (> 8 hours) is not recommended.
Continuous operation results in increased zoom lens failure
and maintenance expense.
Using an American Dynamics controller, nine (1 -9) VectorScans can be
programmed using the setup menu accessed by
PreShot 61.
VectorScan 0
is reserved for the American Dynamics Control System.
Refer to
Section 5.7.2
for programming VectorScans.
10.7.1 List Programmed VectorScans
VectorScans are programmed and viewed through the setup menu. Send the HD6 to
PreShot 61 to access the setup menus. Refer to
Section 5.7.2
.
10.7.2 List Contents of a VectorScan
VectorScans are programmed and viewed through the setup menu. Send the HD6 to
PreShot 61 to access the setup menus. Refer to
Section 5.7.2
10.7.3 Run VectorScan
VectorScans 1, 2, and 3 can be run from the controller using
PreShots 30, 40,
and
50
,
respectively. To start a VectorScan stored in a scan unit, the scan must be the control
camera on the system controller.
Example:
To start VectorScan 2, send a
PreShot 40
command.
When a scan receives a command to run a VectorScan, the scan goes to the first
PreShot programmed in the VectorScan at maximum velocity (400°/second) for the
programmed dwell time, then goes to the next PreShot in the VectorScan at the
programmed velocity for the specified dwell time, etc. When a VectorScan is running
continuously, the unit goes from the last PreShot to the first PreShot at the programmed
velocity. The amount of time the scan takes to go to each PreShot depends on the
programmed velocity and the distance to the next PreShot’s pan and tilt coordinates.
The velocity is programmable between 1° to 400° per second.
If:
Then:
VectorScan auto focus is ON
If the VectorScan auto focus feature is ON, the
lens auto focuses continuously throughout the
operation of the VectorScan
VectorScan auto focus is OFF
The lens focuses to the focus setting
programmed for each PreShot.
Rev. 1.02
106
900.0679
22-June-2006
Summary of Contents for HD6 Series
