Honeywell GNS-XLS Operator'S Manual Download Page 57

Page: 57 / 415

Page Display Definitions

2-25

GNS-X

Flight Management System

Rev. 3
Sep/96

Columns 2 and 3:

Same as VLF SUBSECTION 3/4.

IRS/INS SUBSECTION PAGES

IRS (or INS) SUBSECTION 1/2 (Page 1 of 2)

POS:

The position in this field is
the same as POS on NAVI-
GATION 4/4. (Figure 2-29)

IRS/INS:

The actual position comput-
ed by the specified sensor
when in NAV mode. (Figure
2-29)

DIF:

The difference between the

composite position and the sensor computed position in degrees,
minutes, and hundredths. (Figure 2-29)

IRS SUBSECTION 2/2 (Page 2 of 2)

TIME TO NAV:

The time remaining until alignment is complete. (Figure 2-30)

CURRENT MODE:

This field annunciates the cur-
rent mode of the IRS. The
messages that can appear
are ATTITUDE, ALIGN, or
NAV. (Figure 2-30)

NOTE: Page 2 is only dis-
played with an IRS.

POS N 49 50.20

W111 41.60

IRS

N 38 50.10

W094 55.20

DIF‘ N 11 00.10

W 16 46.30

IRS

SUBSECTION

1/2

Figure 2-29

IRS STATUS

TIME

TO NAV

----

CURRENT MODE:

NAV

IRS

SUBSECTION

2/2

Figure 2-30

Summary of Contents for GNS-XLS
































































































































































































































































































































































































































Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands

Honeywell GNS-XLS, Operator'S Manual

Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands