Honeywell GNS-XLS Operator'S Manual Download

Page: 298 / 415

7-36

GNS-X

Flight Management System AFIS Operation

Rev. 3

Sep/96

13. ENTER Key - DEPRESS. The WINDS ALOFT Menu Page

appears with the new identifier in place of the original identifier,

and the cursor positioned at the location of the original identifier

selected. If there is no data available for the new identifier, it will

appear in parentheses.

TO DELETE TEXT WHEN THERE IS NO DATA ENTRY IN
PROGRESS:

14. Place cursor over identifier on AFIS WINDS ALOFT page.

15. Depress BACK key the the ENTER Key.

RECALLING AFIS FLIGHT PLAN

This procedure allows a previ-
ously accessed AFIS Flight
Plan and associated weather to
be recalled from the Global
Data Center.

RECALL OPTION 1:

1. AFIS Key - DEPRESS to

display AFIS MENU Page.

2. Line Select Key -

DEPRESS to position cur-
sor over Option 5, RECALL
AFIS FPL. (Figure 7-63)

3. ENTER Key - DEPRESS.

RECALL AFIS FPL Page
appears.

4. Line Select Key -

DEPRESS to position cur-
sor next to FPL # field.

5. FPL # - INSERT desired

AFIS Flight Plan number.
(Figure 7-64)

AFIS MENU

AFIS FLT PLAN

SIGMETS

TERMINAL WX

WINDS ALOFT

RECALL AFIS FPL

SEND AFIS MSG

DISPL AFIS MSG

OPERATING MODES

Figure 7-63

RECALL AFIS FPL

FPL-#

A1234

DATE

ETD

Figure 7-64

Summary of Contents for GNS-XLS
































































































































































































































































































































































































































Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands

Honeywell GNS-XLS, Operator'S Manual

Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands