Honeywell GNS-XLS Operator'S Manual Download

Page: 392 / 415

6. ENTER Key - DEPRESS. The cursor will automatically move to

the FUEL field.

7. INSERT a Y for yes if fueling will be needed. Insert an N for no if

fueling will not be needed.

8. ENTER Key - DEPRESS. The cursor will move to the DEICE

field.

9. INSERT a Y for yes if deicing will be needed. Insert an N for no if

deicing will not be needed.

10. ENTER Key - DEPRESS. The cursor will move to the GPU field.

11. INSERT a Y for yes if a ground power unit will be needed. Insert

an N for no if a ground power unit will not be needed.

12. ENTER Key - DEPRESS. The cursor will move to the DETAIL-

ING field

13. INSERT a Y for yes if detailing service will be needed. Insert an

N for no if detailing service will not be needed.

14. ENTER Key - DEPRESS. The cursor will move to the WIND-

SHIELD field.

15. INSERT a Y for yes if windshield service will be needed. Insert

an N for no if windshield service will not be needed.

16. ENTER Key - DEPRESS. The cursor will move to the UM field.

17. INSERT the number of unaccompanied minors on board.

18. ENTER Key - DEPRESS. The cursor will move to the first WC

field. This first field is for aisle type (A) wheel chair.

19. INSERT the number of passengers on board needing aisle type

wheel chairs.

20. ENTER Key - DEPRESS. The cursor will move to the second

WC field. This second field is for standard type (S) wheel chair.

21. INSERT the number of passengers on board needing standard

type wheel chairs.

8-62

GNS-X

FMS with Regional Airline AFIS

Rev 8

Apr/00

Summary of Contents for GNS-XLS
































































































































































































































































































































































































































Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands

Honeywell GNS-XLS, Operator'S Manual

Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands