Honeywell GNS-XLS Operator'S Manual Download

Page: 349 / 415

DISPATCH
REVIEW/UPDATE

1. AFIS Key - DEPRESS, if

necessary, to display the
AFIS MENU Page.

2. Line Select Key -

DEPRESS to position the
cursor over DISPATCH.
See Figure 8-17.

3. ENTER Key - DEPRESS.

The DISPATCH MENU
Page is displayed. See
Figure 8-18.

4. Line Select Key -

DEPRESS to position the
cursor in the NEED
RELEASE field.

NOTE: The Line Select Keys
may be used at any time to
enter or change data.

5. Press the BACK or * Key

to select (an asterisk is dis-
played if selected) for
release from the gate. Press BACK or * to deselect.

6. ENTER Key - DEPRESS. The cursor will automatically move to

the NEED FLIGHT PLAN field.

7. Press the BACK or * Key for selection (an asterisk is displayed if

selected) if a new AFIS flight plan needed. Press BACK or * to
deselect.

8. ENTER Key - DEPRESS. The cursor will move to the MANUAL

RELEASE field.

9. Press the BACK or * Key for selection (an asterisk is displayed if

selected). Press BACK or * to deselect.

10. ENTER Key - DEPRESS. The cursor will move to the AMEND

RELEASE field.

8-19

GNS-X

FMS with Regional Airline AFIS

Rev 4
Sep/97

WGT/BAL INITIALIZE

STATION DVT/HOLD

WEATHER CLOSE OUT

DISPATCH

SEND MSG

DISPLAY MSG

20:09 AFIS MENU

Figure 8-17

NEED RELEASE

NEED FLIGHT PLAN

MANUAL RELEASE

AMEND RELEASE

AIRPORT ANALYSIS

TRANSMIT

20:14 DISPATCH MENU

Figure 8-18

Summary of Contents for GNS-XLS
































































































































































































































































































































































































































Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands

Honeywell GNS-XLS, Operator'S Manual

Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands