Honeywell GNS-XLS, Operator'S Manual

Page: 301 / 415

7-39
GNS-X
LS
Flight Management System AFIS Operation
Rev. 3
Sep/96
8. ENTER Key - DEPRESS.
9. FR - INSERT sender's iden-
tification (name or tail num-
ber).
10. ENTER Key - DEPRESS.
11. # - INSERT receiver's
address. See Table 1 for
possible addresses.
12. ENTER Key - DEPRESS.
13. Message - INSERT text
message using the ENTER
Key to access each succes-
sive line. (Figure 7-70)
NOTE: The cursor remains
fixed and the page display
moves up or down one line at a
time through the cursor. Fifteen
lines of text can be entered.
(Figure 7-71)
The following guidelines are
used for entering and editing
text:
a. Entering a character
causes the character at
the cursor position and
all the characters to the
right to be shifted one
position.
b. The BACK Key may be used to delete characters one at a
time from right to left.
c. The SP Key may be used as a spacer to separate words.
d. The PRV Key may be used to move the cursor one space to
the left.
e. The NXT Key may be used to move the cursor one space to
the right.
SEND AFIS MSG
MESSAGE PPM
TO: DISPATCH
FR: N2175C
#: SNABCDE
DELAYED DUE TO WX
NEW ETA IS 1430Z
SEND MESSAGE?
<
>
>
$
%
Figure 7-70
SEND AFIS MSG
DELAYED DUE TO WX
NEW ETA IS 1430Z
PLS ARR GND TRANS
ALSO PLS HAV MECH
AVAIL TO DISCUSS POS
MAINT PROB
SEND MESSAGE?
<
>
>
$
%
Figure 7-71