Honeywell GNS-XLS Operator'S Manual Download Page 358

Page: 358 / 415

7. INSERT temperature. Enter a + or -, followed by one, two or

three digits for temperature. If three digits are entered, no + sign
is entered. This field may also be left blank. Temperature is in
Celsius.

8. ENTER Key - DEPRESS. The cursor will move to the LDG field.

9. INSERT landing weight in pounds. A minimum of two digits is

required or the field may be left blank.

10. ENTER Key - DEPRESS. The cursor will move to the ALT field.

11. INSERT altitude information. A minimum of two digits is required

or the field may be left blank.

12. ENTER Key - DEPRESS. The cursor will move to the FUEL field

13. Press the BACK or * Key for selection (an asterisk is displayed if

selected) if fuel will be needed at the destination. Press the
BACK, Space or * Key to deselect.

14. ENTER Key - DEPRESS. The cursor will move to the DEICE

field.

15. Press the BACK or * Key for selection (an asterisk is displayed if

selected) if deicing will be needed at the destination. Press the
BACK, Space or * Key to deselect.

16. ENTER Key - DEPRESS. The cursor will move to the WIND-

SHIELD field.

17. Press the BACK or * Key for selection (an asterisk is displayed if

selected) if windshield cleaning will be needed at the destination.
Press the BACK, Space or * Key to deselect.

18. ENTER Key - DEPRESS. The cursor will move to the DETAIL-

ING field.

19. Press the BACK or * Key for selection (an asterisk is displayed if

selected) if detailing will be needed at the destination. Press the
BACK, Space or * Key to deselect.

20. ENTER Key - DEPRESS. The cursor will move to the WHLCHR

field.

21. INSERT the number of wheel chairs required or leave blank.

22. ENTER Key - DEPRESS. The cursor will move to the UM field.

23. INSERT the number of unattended minors or leave blank.

8-28

GNS-X

FMS with Regional Airline AFIS

Rev 4

Sep/97

Summary of Contents for GNS-XLS
































































































































































































































































































































































































































Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands

Honeywell GNS-XLS, Operator'S Manual

Search results

Summary of Contents for GNS-XLS

Reviews:

Related manuals for GNS-XLS

Brands by name

Popular brands