CONFIGURATION AND ANALYSIS SOFTWARE ENSUITE
Information for general use
Rev. M / 73023639
218
GasLab Q2
Examples of application tab “Dynamic charts”
Here you can select values which you wish to see in graphic form. To do so, drag the values from the
right-hand window into the central area.
Please remember that these must be “
Groups
” (see above) if you want to display more than 2
values.
Once the required values have been positioned in the center window, click again on “
Poll
”. The
values will then be displayed in a line diagram.
The button will change to “
Suspend
” (as shown below) and “freezes” the graphs when it is
clicked
until fresh values are displayed by clicking on “
Poll
”.
Figure 8.52
: Tab “Dynamic chart”
You can clear the central section again by clicking on “
Remove all
” and display other values in
graphic form.
The number values form the Y-axis, while the recording time is shown as the X-axis.