GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
Information for general use
Rev. M / 73023639
116
GasLab Q2
7.3.11.
System display Users (Login/Logout / Password)
The User management only provides a main display. Users can log in and out
using this display whose appearance changes accordingly.
It can be accessed via Home >> System >> Users
Figure 7.31: Users main display in different appearances
Remote operation panel active
This warning (see above picture on the right) is displayed whenever a user uses
the remote operation panel. This warning is shown on the GasLab Q2 if there is a
connection to enSuite and the remote operation panel is not used or the lock
screene has been removed via enSuite user.
See also
Remote operation panel functions of enSuite
The main display can show the action
Login
as in the figure above left. The users, created in the
parameter set of the device (see section
) as well as the always
existing main users and the administrator can be viewed and selected via the "
User name
" drop-
down field. Only one user can be logged in at a time. If another user is already logged in locally, via
enSuite or the remote operation panel there, no more logins are possible. The main display shows
the
user name
(example center and right) of the user already logged on to the device. You can (by
arrangement) disconnect the user from the device using the "
Logout
" or "
Logout remote user
"
functions to enable your own login.
In addition to the operation panel or the remote operation panel, it is also possible to
login and logoff in enSuite. enSuite is also used to access the user administration.
Besides the always existing main users, only the users created there can select their
name on the main display.
Details about the user administration, which exists for all enCore devices, can be
found in the Docuthek (
) under "enCore ZM1, BM1, MC1, FC1 -
basic system with SFBs".