GASLAB Q2 DISPLAYS (OPERATE THE DEVICE)
Information for general use
Rev. M / 73023639
119
GasLab Q2
Step
“Changing (own) password” action
4.
After completing the entries, click on
Accept new password
. After the new password has
been checked, it will be valid immediately and the display will change to the logout
screen. Please ensure that you remember your password. If you decide you do not wish
to activate the new password, click on
Discard new password
. The entry will be
discarded and the original password will still be valid. The display still changes to the
logout screen.
A status message is displayed briefly to notify you that the change has been made
or, if applicable, the reason why the change has not been made.
Red text indicates that the password has not been saved.
Figure 7.33: Users main display for changing the password
With the appropriate parameterization, you can additional / alternative protect GasLab Q2
against unauthorized access by operating whis closed SSW.
Step
“Logout” action (from the device/on the operation panel)
1.
The Users main display
contains always an action to
log out
if a user is logged in.
If you are not logged in yourself, you can agree with the user who is logged in to log
them out. Please note that parameter changes by the user you log out will be discarded
unless they have been saved.
2.
Select
Logout
or
Logout remote user
and confirm your selection.
3.
The display changes to the login screen. No users are currently logged in.
When you have finished your work, you should log out to make the device available
to other users, and prevent changes being made by others using your user data.