Honeywell Experion MX Operator'S Manual Download Page 96

Page: 96 / 170

MONITORING

6510020335

Filtering the Alarm Summary

To filter the alarm summary, do the following:

Call the Alarm Summary display.

Click the column heading you want to filter by.

Select the filter you want to apply.

Example Scenario:

You want to filter the Alarm Summary so that you see unacknowledged alarms of high
priority only.

Solution:

Open the Alarm Summary display.

Click the Priority column and select High.

Click the Alarm State column and select Unacknowledged.

The Alarm Summary changes to list unacknowledged alarms of high priority only.

Sorting the Alarm Summary

To sort the alarm summary, do the following:

Call the Alarm Summary display.

Click the column heading you want to sort by.

Select the sort order.

Example Scenario:

You want to sort the Alarm Summary so that alarms are sorted in ascending order by area.

Solution:

Open the Alarm Summary display.

Click the Area column.

Select Sort Ascending.

The Alarm Summary changes to list alarms in ascending order according to the area.

To remove filtering and sorting click

Clear All Filters

Summary of Contents for Experion MX











































































































































































Search results

Summary of Contents for Experion MX

Reviews:

Related manuals for Experion MX

Brands by name

Popular brands

Honeywell Experion MX, Operator'S Manual

Search results

Summary of Contents for Experion MX

Reviews:

Related manuals for Experion MX

Brands by name

Popular brands