CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
146
ESSER Panels
Connecting to the Panels
On the Panel Side
• Connect the +ve wire to the +Ub pin of the power supply module.
• Connect the -ve wire to the Gnd pin of the power supply module.
•
Figure C.8: FlexES Panel Power Connectors
Tools 8000 Settings for FlexES Panels
1. Select the
Serial Interfaces
tab in Tools 8000.
2. Go to the
Serial Interface 1
section.
3. Select
WINMANG
from the
Device in use
list.
4. Go to the
Serial Interface 3
section.
5. Select
Remote Access
from the
Device in use
list.
6. Click
OK
.