CGW-MB Installation and Users’ Manual | P/N:LS10248-000HW-E | REV.G | JUL/31/2022
142
ESSER Panels
Connecting to the Panels
Tools 8000 Settings for ESCOM Panels
1. Select the
Serial Interfaces
tab in Tools 8000.
2. Click
in use
.
3. Go to the
Serial Interface 1
section in the
Serial Interface
dialog.
4. Select
RS 232
from the
Type of Interface
list.
5. Select
WINMANG
from the
Device in use
list.
6. Enter the CLSS Gateway mainboard name in the
Label
field.
7. Click
OK
.
C.4.3 To Use an RS-485 Connection
Using an RS-485 cable the CGW-MB and the panel are connected.
The RS-485 ports in the CLSS Gateway mainboard board are labeled as 3 and 4 in the
1. On the CLSS Gateway mainboard Side
Connect to an RS-485 port of the CLSS Gateway mainboard board.
2. On the Panel Side
FlexES Panels
• Connect the +ve wire to the Terminal 1 of the panel.
• Connect the -ve wire to the Terminal 2 of the panel.