76
languages listed here are optional. Slight difference maybe found in
various series.)
z
HDD full: Here is for you to select working mode when hard disk is full.
There are two options: stop recording or rewrite. If current working HDD
is overwritten or the current HDD is full while the next HDD is no empty,
then system stops recording, If the current HDD is full and then next
HDD is not empty, then system overwrites the previous files.
z
Pack duration: Here is for you to specify record duration. The value
ranges from 60 to 120 minutes. Default value is 60 minutes.
z
DVR No: When you are using one remote control (not included in the
accessory bag) to control several DVRs, you can give a name to each
DVR for your management.
z
Video standard: There are two formats: NTSC and PAL.
z
Auto logout: Here is for you to set auto logout interval once login user
remains inactive for a specified time. Value ranges from 0 to 60 minutes.
z
Startup wizard: Once you check the box here, system will go to the
startup wizard directly when the system restarts the next time.
Otherwise, it will go to the login interface.
z
Device ID: Please input a corresponding device name here.
Note:
Since system time is very important, do not modify time casually unless
there is a must!
Before your time modification, please stop record operation first!
After completing all the setups please click save button, system goes
back to the previous menu.
Summary of Contents for CADVR-04D
