62
PTZ Setup
Note:
The camera video should be in the current screen. Before
setup, please check the following connections are right:
z
PTZ and decoder connection is right. Decoder address setup is
right.
z
Decoder A (B) line connects with DVR A (B) line.
Boot up the DVR, input user name and password.
In the main menu, click setting, and then click Pan/Tilt Control button.
The interface is shown as in
715H
Figure 4-34
. Here you can set the
following items:
z
Channel: select the current camera channel.
z
Protocol: select corresponding PTZ protocol(such as PELCOD)
z
Address: default address is 1.
z
Baud rate: select corresponding baud rate. Default value is 9600.
z
Data bits: select corresponding data bits. Default value is 8.
z
Stop bits: select corresponding stop bits. Default value is 1.
z
Parity: there are three options: odd/even/none. Default setup is
none.
Figure 4-34 PTZ Setting
Summary of Contents for CADVR-04D
