Honeywell CADVR-04D User Manual Download Page 214

Page: 214 / 240

197

4 There is no video output whether it is one-channel, multiple-channel or all-channel output.

There are the following possibilities:

Program is incompatible. Please upgrade to the latest version.

Brightness is 0. Please restore factory default setup.

There is no video input signal or it is too weak.

Check privacy mask setup or your screen saver.

DVR hardware malfunctions.

5 Real-time video color is distorted.

There are the following possibilities:

When using BNC output, NTSC and PAL setup is not correct. The real-time video

becomes black and white.

DVR and monitor resistance is not compatible.

Video transmission distance is too long or video signal is too much degraded.

DVR color or brightness setup is incorrect.

6 Can not search local records.

There are the following possibilities:

HDD ribbon is damaged.

HDD is broken.

Upgraded program is not compatible.

The recorded file has been overwritten.

Record function has been disabled.

7 Video is distorted when searching local records.

There are the following possibilities:

Video quality setup is too low.

Summary of Contents for CADVR-04D
















































































































































































































































Search results

Summary of Contents for CADVR-04D

Reviews:

Related manuals for CADVR-04D

Brands by name

Popular brands

Honeywell CADVR-04D, User Manual

Search results

Summary of Contents for CADVR-04D

Reviews:

Related manuals for CADVR-04D

Brands by name

Popular brands