160
Parameter
Function
DHCP
Dynamically get IP address. You can get the device IP from
the DHCP server if you enabled this function.
TCP Port
Default value is 37777.
HTTP Port
Default value is 80.
UDP Port
Default value is 37778.
RTSP Port
Default value is 554.
Max Connection
Network user max amount. The value ranges from 0 to 20.
O means there is no user can access current device.
Multiple
cast
group
z
Set MULCAST address and port.
z
Enable MULCAST function.
Remote
Host
PPPOE
z
Input the PPPoE user name and password you get from the
IPS (internet service provider) and enable PPPoE function.
Please save current setup and then reboot the device to get
the setup activated.
z
Device connects to the internet via PPPoE after reboot.
You can get the IP address in the WAN from the IP address
column.
z
Please note if you want to reboot the device please make
sure you have proper reboot right and there is no login user
in current device.
The email interface is shown as in
X463H463H463H
Figure 7-33
X
.
Summary of Contents for CADVR-04D
