198
z
Program read error, bit data is too small. There is a mosaic displayed on the full
screen. Please restart the DVR to solve this problem.
z
HDD data ribbon error.
z
HDD
malfunction.
z
DVR hardware malfunctions.
8 There is no audio when live monitoring.
There are the following possibilities:
z
The audio source is not a power picker.
z
The audio output is not connected to a power speaker.
z
Audio cable is damaged.
z
DVR hardware malfunctions.
9 There is audio when monitoring, but there is no audio when system enters playback
mode.
There are following possibilities:
z
Setup is not correct. Please enable audio function
z
Corresponding channel has no video input. Playback is not continuous when the
screen is blue.
10 Time display is not correct.
There are the following possibilities:
z
Setup is not correct
z
Battery contact is not correct or voltage is too low.
z
Crystal is broken.
11 DVR cannot control PTZ.
There are the following possibilities:
z
Front panel PTZ error
z
PTZ decoder setup, connection or installation is incorrect.
z
Cable connection is incorrect.
Summary of Contents for CADVR-04D
