manualshive.com logo in svg

Honeywell CADVR-04D, User Manual, Page: 187 / 240

Share
Download
Honeywell CADVR-04D User Manual Download Page 187

                                                                           

 

 

 

170

Parameter  Function  
Alarm 
Latch 

System can delay the alarm output for specified time after alarm 
ended. The value ranges from 1 second to 300 seconds.  
 

Show 
message  

System pops up the alarm messages in the monitor interface.  
 

Buzzer  

Once you check the box here, the buzzer beeps when an alarm 
occurred.  

Alarm 
upload  

System can upload the alarm signal to the centre (Including alarm 
centre. 

Record 
Channel 

System auto activates current channel to record once alarm occurs 
(working with alarm activation function). Please note current 
device shall be in auto record mode (Chapter 4.4 Schedule).  

Record 
Latch 

System can delay the record for specified time after alarm ended. 
The value ranges from 10s to 300s.  

Email 

Please draw a circle to enable email function. System can send out 
email to alert you when alarm occurs and ends.  

Tour  

Display the selected video in local monitor window.  
Tour interval and tour mode are set in DVR local menu (chapter 
5.3.9 Display ) 

PTZ 
activation  

Here you can set PTZ movement when alarm occurs. Such as go to 
preset x when there is an alarm. 
The PTZ configuration events include preset, tour, and pattern. 

Capture  

You need to input capture channel number so that system can 
backup snapshot file when alarm occurs.  

Copy  

It is a shortcut menu button. You can copy current channel setup to 
one or more (all) channels. 

Save 

You can click save button after you complete setup for one 
channel, or you can complete the whole setups and then click save 
button. 

Refresh  

Click this button to get device latest configuration information. 

Detect  

Analysis the video, system enable motion detection alarm when it 
detects the motion signal reached the specified sensitivity. 

The detection interface is shown as in Figure 7-42. 

Summary of Contents for CADVR-04D

















































































































































































































































Reviews:

No comments