manualshive.com logo in svg

Honeywell BENDIX/KING KLN 94, Pilot'S Manual

Share
Download
Honeywell BENDIX/KING KLN 94 Pilot'S Manual Download Page 35

KLN 94  Pilot’s Guide

Chapter 2 Data Base

2-9

2.5. USER DEFINED DATABASE

In addition to the aeronautical and land databases, you may create up to
500 other user-defined waypoints. Section 5.4, “Creating User-defined
waypoints” describes this further.  

The KLN 94 contains an internal lithium battery that is used to “keep-alive”
the user-defined database as well as flight plans.  This battery has a typi-
cal life of three to five years.  It is highly recommended that the battery be
replaced every three years at an authorized Honeywell Service Center.

2.6. DATABASE UPDATE SERVICE OPTIONS

The following tear-out page can be used for ordering Americas, Atlantic
International, and Pacific International database update services from
Honeywell. The forms may be mailed or FAXed for your convenience.

Summary of Contents for BENDIX/KING KLN 94





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands