manualshive.com logo in svg

Honeywell BENDIX/KING KLN 94, Pilot'S Manual

Share
Download
Honeywell BENDIX/KING KLN 94 Pilot'S Manual Download Page 29

NDBs (En Route and Terminal)

Identifier
Name
Frequency
Latitude and Longitude
(Note - Outer Compass Locators may be stored as an NDB by their NDB
identifier or as an intersection by their intersection name)

DMEs

associated with ILS/LOC type approaches – Stored with

Intersections by the approach identifier (e.g. IJFK)
Identifier
Latitude and Longitude

Intersections

(low altitude, high altitude, DP/STAR, approach, and outer

markers).  Also includes DMEs associated with ILS/LOC type approaches.
See DMEs
Identifier
Latitude and Longitude

DP/STAR/Approach Procedures 

All compatible pilot-nav DP/STAR procedures
All compatible non-precision and precision approaches.  Includes all pub-
lic GPS-only approaches. Only those non-precision approaches
designated on the Airport 8 page with “GPS” may be used to actually exe-
cute an approach with the KLN 94.

Miscellaneous

Air Route Traffic Control Center (ARTCC and FIR) frequencies
Flight Service Stations (location of points of communication and associat-
ed frequencies)
Minimum Safe Altitudes
Special Use Airspace (SUA) boundaries-Outer and inner* rIngs
(Prohibited, Restricted, Alert, Class B, Class C, CTA, TMA, TRSA,
Caution, Danger, MOA, Training, Warning)

*ORS 01 and 2 have outer rings only.

LAND DATA

Lakes, rivers, oceans
Roads
Population areas (cities, towns)
Railroads
Political boundaries
Obstacles (towers)

500 USER DEFINED WAYPOINTS

Identifier
Latitude and Longitude

KLN 94  Pilot’s Guide

Chapter 2 Data Base

2-3

Summary of Contents for BENDIX/KING KLN 94





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands