Honeywell BENDIX/KING KLN 94, Pilot'S Manual

Page: 220 / 284

3. Use the right inner and outer knobs in the normal manner to define
the desired waypoint.
4. Press
F
to display the waypoint page for this identifier. If the way-
point is correct, then press
F
a second time to confirm the waypoint
page. The new waypoint is added to the waypoints that make up the
DP or STAR procedure.
To delete an individual waypoint in a DP or STAR procedure:
1. Use the right knobs to select the FPL 0 page.
2. Rotate the right outer knob to place the cursor over the waypoint to be
deleted.
3. Press
E
. The letters DEL (delete) will appear to the left of the identi-
fier and a question mark will appear to the right of the identifier.
4. If this is the desired waypoint to delete, then press
F
. If it is not the
desired waypoint, press
E
.
NOTE : Adding waypoints to or deleting waypoints from DP or STAR pro-
cedures does not change the way that they are stored in the published
database.
To delete an entire DP or STAR procedure from the active flight plan:
1. Use the right knobs to select the FPL 0 page.
2. Turn the cursor on by pressing the
B
. Move the cursor over the DP
or STAR procedure header by using the left outer knob. When the
cursor is moved over the header it changes to read
CHANGE STAR?
or CHANGE DP? .
3. With the cursor over the procedure header, press
F
to change the
DP or STAR, or press
E
and then
F
to delete the entire proce-
dure.
NOTE : Any waypoints manually added to a DP or STAR will be deleted if
the DP or STAR is changed or deleted using the above procedure.
To change a DP or STAR procedure in the active flight plan:
1. Press the
P
button to bring up the PROC 1 page. Move the cursor
over Select Depart? or Select Arrival? as appropriate. Press
F
to
display the PROC 2 page.
2. With the cursor over the desired airport, press
F
to display the
APT 7 page showing the list of DPs or STARs. Select the new DP or
STAR, transition, and runway in the normal manner.
Chapter 6 Approaches and DP/STARs
6-44