Honeywell BENDIX/KING KLN 94, Pilot'S Manual

Page: 166 / 284

2. Turn on the cursor (
B
).
3. If desired, select another way-
point identifier using the right
inner and outer knobs. Press
F
to view the waypoint page
for the waypoint entered. Press
F
again to approve the way-
point page (figure 5-82).
4. If desired, select another date
using the right inner and outer
knobs. You must press
F
to
enter the date (figure 5-83).
5. If desired, select another time
zone. The sunrise and sunset
times for the selected waypoint,
date, and time zone are now dis-
played (figure 5-84).
5.11. VIEWING AND DELETING USER WAYPOINTS AND
WAYPOINT REMARKS (AUX 12 AND AUX 13 PAGES)
The AUX 12 and AUX 13 pages list the user-defined waypoints and way-
point remarks, respectively, which are currently stored in the KLN 94’s
memory.
5.11.1.THE AUX 12 PAGE
An example of an AUX 12 page is
shown in figure 5-85. All currently
stored user-defined waypoints are
listed in alphanumeric order. If the
user-defined waypoint is the active
waypoint, an arrow (
→
) follows the
identifier. If the waypoint is used in
one or more flight plans, then the number of the first flight plan in which it
is used is displayed on the right side. If there are more than four user
waypoints in storage, you can see the rest of the list by turning on the cur-
sor (
B
) and turning the right outer knob to scroll through the list.
To delete a user-defined waypoint
from the AUX 12 page:
1. Turn on the cursor and position it
over the desired waypoint (figure
5-86). If there are more than four
Chapter 5 Intermediate Operation
5-32
Figure 5-82
Figure 5-83
Figure 5-84
Figure 5-85
Figure 5-86