manualshive.com logo in svg

Honeywell BENDIX/KING KLN 94, Pilot'S Manual

Share
Download
Honeywell BENDIX/KING KLN 94 Pilot'S Manual Download Page 268

• Procedure turns and holding patterns associated with approaches,

DPs, and STARs are displayed on the map (section 3.11.4.12).

• New airport map icons now distinguish between airports having

hard surface runways vs. soft surface runways and show the orien-
tation of the longest runway if available (section 3.11.4.7).

• New highway map icons are used for the Atlantic International and

Pacific International databases (section 3.11.4.7).

• Approaches which have the format of “RNAV # 18L” can now be acco-

modated. The “#” is a letter or number that designates there is more
than one approach of a given type (i.e. RNAV) to the same runway.
This format has been adopted by the FAA and other international avia-
tion agencies.

Example 1: There could be RNAV Y 18L and RNAV Z 18L 
approaches at the same airport.
Example 2: There could be RNAV 1 09L and RNAV 2 09L 
approaches at the same airport.

Additional Operational Differences Incorporated In KLN 94 ORS 03 Units

• The inner rings of Class B, Class C, TMA and CTA airspace are dis-

played on the Nav 4 map page (section 3.11.4.4). 

Appendix G KLN 89B Operational Comparison

G-4

Summary of Contents for BENDIX/KING KLN 94





























































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands