manualshive.com logo in svg

Honeywell AUTOMATIC CONTROL SI Edition, Engineering Manual

The Honeywell AUTOMATIC CONTROL SI Edition Engineering Manual is a comprehensive resource for engineers seeking to understand and implement automatic control systems. This invaluable manual can be downloaded for free from our website, providing users with step-by-step guidance, detailed explanations, and practical examples to optimize control processes.

Share
Download
background image

INDIVIDUAL ROOM CONTROL APPLICATIONS

ENGINEERING MANUAL OF AUTOMATIC CONTROL

419

TWO-PIPE HEATING/COOLING 

The flow of medium thr ough a f an coil unit can be contr olled

in tw o ways. One method uses a tw o-way valve to contr ol the
flow of steam or hot or c hilled water. The second method , shown
in F igur e 31, uses a thr ee-way valve to contr ol hot or c hilled
water f low.

Fig. 32. Two-Pipe Heating/Cooling Fan Coil Unit.

The r oom ther mosta t opens the coil v alve on a f all in space

temper atur e dur ing the hea ting c ycle. In the cooling c ycle,
chilled w ater in the pipes causes the pipe-mounted sensor to
reverse the ther mosta t action and the ther mosta t opens the v alve
as space temper atur e rises. The fan can be oper ated fr om a local
switch or a central time clock.

The surf ace ar ea of the coil is lar ge to accommoda te cooling

requir ements.  Ther efor e, when a single coil is used f or both
heating and cooling , the hot w ater suppl y temper atur e should
be lower. Typical hot w ater suppl y temper atur es range between
32 and 60

°

C.

Fig. 31. Two-Pipe Heating Fan Coil Unit

Using Three-Way Mixing Valve.

The thr ee-way valve pr ovides constant f low in the suppl y

and r etur n lines and minimiz es pr essur e fluctua tions a t the v alve.
A modula ting ther mosta t contr ols the thr ee-way valve to
regula te water f low thr ough the coil. In a hea ting a pplica tion,
when the ther mosta t senses space temper atur e below the
ther mosta t setpoint,  the valve is positioned to allo w full flow
thr ough the coil.  As space temper atur e r ises, the ther mosta t
contr ol signal modula tes the v alve to decr ease the amount of
flow thr ough the coil and incr ease the b ypass f low ar ound the
coil. At the upper end of the ther mosta t thr ottling r ang e, the
valve is in the coil b ypass position,  elimina ting f low thr ough
the coil.  The fan r uns contin uousl y or is stopped as space
temper atur e rises above setpoint. Cooling-onl y systems oper ate
in a similar w ay.

TWO-PIPE HEATING/COOLING, SINGLE COIL

Figur e 32 shows a tw o-pipe f an coil a pplica tion tha t uses a

single coil for hea ting and cooling with seasonal c hang eover.
Control for this application requires a heating/cooling room
ther mosta t tha t r everses its action fr om a r emote hea ting/cooling
chang eover signal. One method of automa tic chang eover is to
install a pipe-mounted sensor that switches thermostat action
when it senses a change in supply medium between hot and
chilled water. Because it cannot of fer sim ultaneous hea ting and
cooling ca pa bility, this system can cause pr oblems dur ing
inter media te seasons w hen hot w ater is in the system and
cooling is needed , or vice v er sa.

C3033

DISCHARGE 
AIR

THERMOSTAT

RETURN
AIR

FILTER

HEATING 
COIL

FAN

FAN
SWITCH

POWER

3-WAY
MIXING
VALVE

HOT
WATER
SUPPLY

HOT
WATER
RETURN

C3032

DISCHARGE 
AIR

THERMOSTAT

RETURN
AIR

FILTER

HEATING OR
COOLING COIL

FAN

POWER

TIME
CLOCK

3-WAY
MIXING
VALVE

SUPPLY

PIPE-MOUNTED
SENSOR

RETURN

HOT
WATER
OR
CHILLED
WATER

Fig. 33. Digitally Controlled Two-Pipe

Heating/Cooling Fan Coil Unit.

M15317

FILTER

FAN

RA

OUTDOOR AIR

ON

CONTROL
PROGRAM

-1.5

24

24

8

13

77

HEATING
DEADBAND

WALL MODULE

TEMPERATURE

COOLING
SETPOINT

PERCENT
OPEN

Summary of Contents for AUTOMATIC CONTROL SI Edition

































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for AUTOMATIC CONTROL SI Edition

C.Nord GSM Operation Manual preview
GSM
Brand: C.Nord Pages: 100
3Com CoreBuilder 9000 Getting Started Manual preview
CoreBuilder 9000
Brand: 3Com Pages: 78
3Com REMOTE ACCESS SYSTEM 1500 Getting Started Manual preview
REMOTE ACCESS SYSTEM 1500
Brand: 3Com Pages: 62
Quectel BG96 At Command Manual preview
BG96
Brand: Quectel Pages: 23
Quectel BG96 Hardware Design preview
BG96
Brand: Quectel Pages: 79
Habegger AL-A 64 kN Operating Instruction preview
AL-A 64 kN
Brand: Habegger Pages: 2
ICM Controls ICM325HN Installation, Operation & Application Manual preview
ICM325HN
Brand: ICM Controls Pages: 2
OBSIDIAN CONTROL SYSTEMS NX1 Installation Manual preview
NX1
Brand: OBSIDIAN CONTROL SYSTEMS Pages: 13
Oceanic DX1 Product Service Manual preview
DX1
Brand: Oceanic Pages: 11
+GF+ EA15 Instruction Manual preview
EA15
Brand: +GF+ Pages: 3
Össur ICELOCK 551 Instructions For Use Manual preview
ICELOCK 551
Brand: Össur Pages: 58
hager ZZ45WAN2PP Mounting Instructions preview
ZZ45WAN2PP
Brand: hager Pages: 2
hager TYB601A Quick Start Manual preview
TYB601A
Brand: hager Pages: 4
M-system R5-TS Instruction Manual preview
R5-TS
Brand: M-system Pages: 3
Jetter JetWeb JX2-PRN1 Operator'S Manual preview
JetWeb JX2-PRN1
Brand: Jetter Pages: 25
Eaton Cutler-Hammer LMR Instructions Manual preview
Cutler-Hammer LMR
Brand: Eaton Pages: 38
LMI Technologies Liquitron DP5000-01A Instruction Manual preview
Liquitron DP5000-01A
Brand: LMI Technologies Pages: 28
Motrona CA306 Operating Manual preview
CA306
Brand: Motrona Pages: 10

Brands by name

Popular brands

Load more brands