Honeywell 2450Cm Series, User Manual

Page: 34 / 276

Performance Series Network Video Recorder User Guide
20
•
If you didn’t set the unlock pattern, device displays the password login window, see Figure
2-8 .
Note
Click Switch User , NVR goes to general user login interface.
The default user name is admin. Select a user from the
username dropdown list and login via this user.
2. Click and the following figure is displayed.
Figure 2-9 Reset – Security Question
Enter the correct answers here.
3. Click Next . NVR displays the reset password window.
Figure 2-10 Reset – Password
4. Enter the new password and then confirm.
Note
STRONG PASSWORD RECOMMENDED-For your device own
safety, please create a strong password of your own choosing.
The password shall be at least 8-digit containing at least two
types of the following categories: letters, numbers and
symbols. We also recommend you change your password
periodically especially in the high security system.
5. Click
OK
to complete the setup.