Honeywell 2450Cm Series User Manual Download Page 152

Page: 152 / 276

Performance Series Network Video Recorder User Guide

138

indicates there is an error.

indicates that there is no HDD.

indicates that a HDD is damaged.

Device Name:

Shows the name you have given the device.

Physical Position:

Describes the hard drive bay where the hard drive is installed.

Type

: Indicates the HDD type (for example,

Read/Write

Free Space

: Indicates the amount of free space remaining on the HDD.

Total Space:

Indicates the total capacity of the HDD.

Status:

Indicates the operating status of the HDD.

S.M.A.R.T.:

Indicates S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) status.

In the list of HDDs, double-click a HDD to view more details .

Figure 11-2 S.M.A.R.T. Information Window

Right-click to return to the previous screen.

Viewing Recording Information

Go to

Main Menu



INFO



SYSTEM RECORD

Summary of Contents for 2450Cm Series





















































































































































































































































































Search results

Summary of Contents for 2450Cm Series

Reviews:

Related manuals for 2450Cm Series

Brands by name

Popular brands

Honeywell 2450Cm Series, User Manual

Search results

Summary of Contents for 2450Cm Series

Reviews:

Related manuals for 2450Cm Series

Brands by name

Popular brands