Honeywell 2450Cm Series, User Manual

Page: 146 / 276

Performance Series Network Video Recorder User Guide
132
3. Next to the Enable check box, click Blocked Sites .
4. Click Add .
5. To add a single IP address, select IP Address from the drop-down list and enter the IP
address of the site that you want to block and click OK .
To add a range of IP addresses, select IP Section from the drop-down list and enter the
starting address in the upper IP address field and the ending address in the lower field,
and then click OK . Both IPv4 and IPv6 address are supported.
6. Click Apply to save your settings.
7. If you want to save your settings and exit the SETTING menu, click OK .
Configuring Automatic Maintenance Settings
You can set up the NVR to automatically restart.
1. Go to Main Menu

SETTING

SYSTEM

AUTO MAINTAIN
.
Figure 10-18 Auto Maintenance Configuration Window
2. Select one of the following options: Never , ALL , Sunday , Monday , Tuesday , Wednesday ,
Thursday , Friday , or Saturday , and select a time of day to auto reboot from the drop-
down menu.
3. Click Apply to save your settings.
4. If you want to save your settings and exit the SETTING menu, click OK .
Exporting and Importing System Configurations
You can export and/or import NVR system configurations if you are installing several NVRs
requiring the same setup.