Performance Series Network Video Recorder User Guide
214
Table 12-26 Recording Storage Interface
Setting
Description
Channel
See the channel numbers, including the maximum number of
channels.
Auto
Select
Auto
, and the system enables the automatic recording function
as you set it in the
Recording Schedule Setup
. See Configuring Storage
Schedules on page 73.
Manual
This is the highest priority. Enable the corresponding channel to record
not matter what period was applied in the Recording Setup.
Stop
Stop recording the current channel no matter what recording setup is
applied to that channel.
Start All/Stop All
Select the
All
selections to make the same setting for all channels.
Configuring Advanced Storage Settings
1.
Click
Advanced
under
Storage
to open the
Advanced
storage interface.
Figure 12-87 Advanced Storage HDD Interface
2.
On the
Advanced HDD
tab, you can assign names to hard drives and hard drive groups.
3.
On the
Main Stream
,
Sub Stream
, and
Snapshot
tabs you can select the hard drive or
hard drive groups to store recorded data from each stream channel or snapshot channel.
Figure 12-88 Advanced Main Stream Interface
4.
Click
OK
to save your settings.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...
