Performance Series Network Video Recorder User Guide
216
Figure 12-90 Date & Time Configuration Interface
Table 12-28 Date & Time Configurations
Configuration
Description
Date Format
Select the date format from the drop-down list.
Time Format
Select from either
24 hour
or
12 hour
.
Date Separator
Select from a period (.), a hyphen (-), or a slash (/).
System Time
Set the NVR’s time. You have to Save to activate this setting.
Sync PC
Click to synchronize your NVR’s time with your PC’s time.
Time Zone
Select a Time Zone for the NVR.
DST
Click to enable Daylight Saving Time (
DST
). Click to select a type, either
Date
or
Week
. Then configure a date and time when DST begins and
ends.
NTP
Click to enable the
NTP
server.
NTP Server
Enter the NTP time server address.
Port
Enter the NTP time server port.
Upgrade Interval
Configure the synchronization period between the NVR and the NTP
time server.
Holiday Settings
1.
Click the
Holiday
tab in the
GENERAL
settings configuration interface to open the
Holiday Setup
configuration interface.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...