Honeywell 2450Cm Series, User Manual

Page: 16 / 276

Performance Series Network Video Recorder User Guide
2
Storage
•
Supports central server backup that follows your configuration and setup in Alarm or
Schedule settings.
•
Supports recording through the Internet. The recorded files are stored on the client’s PC.
•
Supports network storage, such as FTP, NAS.
Alarm
•
Responds to external alarms almost instantly (within 200 milliseconds), based on your
pre-defined relay setup. You can also configure a visual and/or noise prompt (if
supported by a pre-recorded noise) upon alarm detection.
•
Supports central alarm server setup, so that alarm information can automatically and
remotely notify users. The alarm input can be derived from various connected peripheral
devices.
Network Monitor
•
The NVR supports the transmission of audio/video data that is compressed by an IP
camera, which is then decoded for display. The delay time is less than 500 ms (sufficient
network bandwidth support is required).
•
Supports a maximum of 10 connections.
•
Compatible to broadcast audio/video with the following transmission protocols: HTTP,
TCP, UDP, MULTICAST, RTP/RTCP.
• Transmits some alarm data or alarm information through SMTP.
•
Supports Internet access through the WAN.
Window Split
Video compression plus a digital process allows the NVR to split the monitor screen to show
four video channels at the same time.
Recording
Supports a schedule for recording. The recorded files can be saved in the HDD, on the client’s
PC, or on a network storage server. You can search and view the recorded video that is stored
locally or through the Internet connection.
Backup
Supports backing up video, through the network, to a USB 2.0 device. The recorded files can
be saved on the network storage server, on a peripheral USB 2.0 device, or to a burner, for
example.
Network Management
•
Supports NVR configuration and management through the Ethernet.
•
Supports device management through the Internet.
Peripheral Equipment Management
•
Supports peripheral equipment management such as protocol setup and port
connection.
•
Supports transparent data transmission such as RS232 (RS-422) and RS485 (RS-485).
Auxiliary