Web Client Operation
197
Heat Map
The heat map feature detects moving objects in the camera scene that can be generated as a
report based on the object’s heat. The heat colors range from blue to red, with blue
representing the minimum heat value and red representing the maximum heat value. This
information can then be searched and generate reports (see
on page
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
1.
Go to
Setup
Event
Heat Map
.
Figure 12-68 Heat Map Configuration Interface
2.
Select the Channel to configure for heat map from the drop-down menu and check the
Enable
check box.
3.
To set the periods when heat map is active, next to
Period
, click
Set
, and then follow the
steps listed in
Motion Detection Configurations
Configuring Smart Plan Settings
Smart plan is a master switch for the intelligent analytics such as Face Detection and People
Counting. The device intelligent functions can be valid after smart plan is enabled.
Go to
Setup
Event
Smart Plan
. Select a channel that you want to apply the smart plan to
and select the plan by clicking its icon and click
OK
.
Summary of Contents for 2450Cm Series
Page 2: ......
Page 27: ...Getting Started 13 ...
Page 28: ...Performance Series Network Video Recorder User Guide 14 ...
Page 29: ...Getting Started 15 ...