manualshive.com logo in svg

Honeywell Home CN80G Series, User Manual, Page: 46 / 124

Share
Download
Honeywell Home CN80G Series User Manual Download Page 46

36

CN80G Mobile Computer Series User Guide

9. Insert the microSD card into the card holder with the contacts facing out.

10.  Close the holder with the card inserted. Press down gently on the card holder

 and slide it into the locked position.

11.  Close the card access door and tighten the screws.

12.  Install the battery and apply pressure to the edge closest to the battery latch.

13.  Install the hand strap.

14.  Press the 

Power

 button to turn On the computer.

How to Transfer Files

To transfer files, you need to physically connect the CN80G

 

mobile computer to 

your workstation (e.g., laptop or desktop computer) through a USB connection. 
When the mobile computer is connected and USB is configured for file or photo 
transfer, use a file browser (e.g., File Explorer) on your workstation to transfer files 
between the two computers. If you are transferring files to and from a Mac, use the 
Android File Transfer application (available from 

www.android.com/filetransfer

). 

Note:

File transfer through a USB connection is disabled by default. You need to configure 
the USB connection for transferring files or photos. 

You can use these accessories to connect your mobile computer to your 
workstation:

•

Home Base or Ethernet Home Base, and a standard USB Type B to A cable

•

Snap-On Adapter, Tethered USB Cable client (PN CN80-SN-USB)

Summary of Contents for CN80G Series





























































































































Reviews:

No comments