manualshive.com logo in svg

Honeywell Home CN80G Series, User Manual, Page: 121 / 124

Share
Download
Honeywell Home CN80G Series User Manual Download Page 121

CN80G Mobile Computer Series User Guide

111

Note:

To learn about changing the symbology settings, see 

Change the Scanner Settings

 on 

page 50.

N6603ER Imager Engine Reading Distances 

The depth of field measurements were taken using these parameters:

•

Distances are measured from the front of the engine.

•

+23 °C (+73 °F), 0 lux

•

Photographic quality codes

Note:

Time to Read and Depth of Field are impacted if the barcode symbol is at the edge of 
the image.

White Illumination Monochrome Sensor Only

UPC/EAN

Disabled

UPC-A

Enabled

UPC-E

Enabled

UPC-E1

Disabled

1D Symbologies

2D Symbologies

Postal Codes

Default

Default

Default

Symbology

Near Distance 
(in/cm)

Far Distance 
(in/cm)

Delta 
(in/cm)

5 mil Code 39

4.1 (10.4)

10.9 (27.8)

6.9 (17.4)

10 mil Code 39

3.1 (8.0)

17.6 (44.7)

15.9 (40.0)

100% UPC

2.2 (5.5)

19.9 (50.5)

18.4 (46.8)

20 mil C39

2.4 (6.1)

27.6 (70.2)

21.2 (53.9)

6.7 mil PDF 417

5.3 (13.6)

9.0 (22.9)

3.6 (9.10)

20 mil QR Code

2.1 (5.3)

19.2 (48.7)

17.2 (43.5)

10 mil DataMatrix/Aztec

5.0 (12.7)

10.5 (26.8)

5.5 (14.1)

Summary of Contents for CN80G Series





























































































































Reviews:

No comments