Honeywell Home CN80G Series, User Manual

Page: 106 / 124

96 CN80G Mobile Computer Series User Guide
Configurations will be distributed to an client that connects to the server devices.
Once the data transmission finishes successfully, the name and serial number of
the configured client will display in the Wi-Fi Staging app on the server device, and
the client device will skip the Android setup wizard.
If you included a file’s hash in Step 8, Wi-Fi Staging will validate that the hash of
the file downloaded to a device matches what you specified. If the downloaded
file’s hash does not match, the file will be removed from the device.
Advanced Configuration
Advanced configuration allows you to stage your devices with one or more .xml files
created by EZConfig or Enterprise Provisioner. For more information about
generating .xml files, see the
PowerTools User Guide or the Enterprise Provisioner
User Guide .
Note:
Advanced Configuration supports .xml files only. Other file types will be ignored.
Note:
Do not change the default names of .xml files. (For example, DeviceConfig.xml is
acceptable, but DeviceConfig1.xml is not.)
1. Choose one device to act as the server.
2. Launch Wi-Fi Staging app on the server by tapping Settings > Honeywell
Settings > Wi-Fi Staging .
3. Tap Advanced Configs
4. Tap File directory
5. Specify where on the server device the .xml files to be downloaded are located.
6. Tap NEXT
7. Choose the files to be applied. Tap NEXT .
8. Review the files you have selected. If you need to change any files, tap the Back
button. Otherwise, tap Confirmed, start staging now! to begin.
Wi-Fi Staging will start a hotspot in the server device and wait for clients to
connect.
9. Proceed to Set up Client Devices on page 84.
Set Up Client Devices
The Wi-Fi Staging client runs automatically on the initial boot of a new device.
However, it must be started manually on existing devices.