35
6 Transportation
6.1 In the Trunk of a Car
Basically you can store your rehab pushchair in the trunk of your car as
well with or without seat unit on as well as with or without wheels on.
The most compact size is achieved by removing the seat unit and
wheels by quick release mechanisms and placing them as shown in
the mobility base.
6.2 Using BINGO Rehab Pushchair for Bus Transport
Attention!
We recommend that, wherever and whenever possible,
users transfer to the seats installed in the motor vehicle
and use the corresponding vehicle restraint systems,
because this is the only way to ensure optimum protection
of the passengers in case of an accident.
Your BINGO Rehab Pushchair was successfully tested in
accordance with ANSI/RESNA WC/19 and ISO 7176/19
(Crash Test).
It is, however, possible to use your BINGO Rehab
Pushchair as a seat in a motor vehicle, if our “Tie down
Kit” (article 3201-7300) as well as appropriate restraint
systems are used.
This Rehab Pushchair is equipped with back angle and
seat tilt adjustment. Before starting you must tilt the
backrest until the lock pin (A) locks into the hole (B) in the
back plate. Tight the lever (C) well after this adjustment.
Using the seat tilt adjustment you must bring the backrest
into almost upright position (max. 20°). Observe the
specifications under 4.7 and 4.14 in this user manual.
The illustration shows mounting parts of the transport lock on the
street frame.
B
A
C
