16
Before use in the reverse riding direction the base adapter must be
rotated 180°.
• Remove all four bolts and rotate the base adapter.
• Tighten the bolts firmly again.
4.14 Tilt in space
The BINGO seat unit can be tilted up to 45° in driving direction and
40° against driving direction in steps of 8,5° degrees.
• Put on the wheel lock and stand beside the pushchair
• Tighten the clamping lever of the back rest adjustment firmly.
• Secure the seat unit with one hand holding onto the back rest.
• To avoid high resistance for the travel of the trigger release the
tilting mechanism by balancing the seat.
• To overcome the child protection pull the trigger outside first.
• Pull then the trigger upward until the locking device opens the tilt
mechanism and swing the seat unit to the desired position.
• Disengage the trigger and swing the seat unit until the locking
device locks with a hearable click.
Caution!
Check by pulling the seat sharply forward that
the locking device is properly engaged.
If so, the indicator hole is complete covered
by the lever housing.
